power entry modules without line filter kec www.schurter.com/pg0 5 connectors iec appliance inlet c14 with fuseholder 1- or 2-pole and voltage selector fuse drawer must be ordered separately (see accessories). fuse drawer must be ordered separately (see accessories). standard or medical fuse drawer c14 70 c description - panel mount: screw-on version from front or rear side, snap-in version from front side - 3 functions: appliance inlet protection class i, fuseholder with interchangeable fuse drawer for fuse-links 5 x 20 mm or 6.3 x 32 mm 1- or 2-pole, with or without voltage selector (step switch) - quick connect terminals 4.8 x 0.8 mm approvals - vde certificate number: 40030345 - ul file number: e93617 - csa file number: 38456 characteristics - available with or without internal connections - the fuse drawer fingergrip can be removed by hand for added safety "extra-safe" fuse drawers are available fuse drawer meets requirements of medical standard iec/en 60601-1 the fuse drawer can only be opened with the aid of a tool the fuseholder is accessible from the equipment front - qualified for use in equipment according iec/en 60950 other versions on request - fuse drawer with other voltage values - for protection class ii - variant with notch for v-lock mating cordsets references alternative: version with line filter kf c weblinks pd f , general product informatio n , approval s , roh s , china-roh s , mating connector s , e-stor e , schurter-stock-chec k , distributor- stock-chec k , accessorie s newly available variants corresponding to v-lock mating cordset. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 13 a / 125 vac; 60 hz 1 ? dielectric strength > 3 kvac between l-n > 4 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 4.8 x 0.8 mm panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm snap-in: 1.5/2/2.5 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 fuseholder 1 or 2 pole, shocksafe category pc2 acc. to iec 60127-6, for fuse-links 5 x 20 or 6.3 x 32 mm rated power acceptance @ ta 23 c 5 x 20: 2.5 w (1 pole)/ 2 w (2-pole) per pole 6.3 x 32: 3.15 w (1 pole)/ 2.5 w (2-pole) per pole power acceptance @ ta > 23c admissible power acceptance at hig - her ambient temperature see derating curves voltage selectors optional, step, 2-4 digits 1) ul/csa: 1-pole version 13 a, 2-pole version 10 a
power entry modules without line filter kec www.schurter.com/pg0 5 connectors dimensions 58 mm screw on pcb mounting 40.7 50 30 55 4.8x0.8 r 4.5 r 6 r 3.1 41 +0.2 0 0.15 58 18 27.5 27.2 ? 3.2 ? 6.3x90? 27.5 +0.2 0 r 3 0 -0.2 50 230 2.2 2 m3/? 3.6 snap-in mounting 40.7 30 55 4.8x0.8 r 4.5 r 3.1 41 +0.2 0 18 27.5 27.2 27.5 +0.2 0 r 3 0 -0.2 43.5 230 2.2 2 s 0.1 diagrams without internal connections voltage selector 4-positions, 1-pole without internal connections voltage selector 4-positions, 2-pole with internal connections voltage selector 4-positions, 1-pole with internal connections voltage selector 4-positions, 2-pole voltage selector 3-positions 1-pole voltage selector 3-positions 2-pole voltage selector 2-positions 1-pole voltage selector 2-positions 2-pole without voltage selector 1-pole without voltage selector 2-pole
power entry modules without line filter kec www.schurter.com/pg0 5 connectors derating curves fuses 5 x 20 mm (1-pole) admissible power acceptance in watt 1.5 1.0 0.5 0.0 2.5 2.0 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c fuses 5 x 20 mm (2-pole, per pole) admissible power acceptance in watt per pole 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n 2.0 1.5 1.0 0.5 0.0 ambient air temperature ta c fuses 6.3 x 32 mm (1-pole) admissible power acceptance in watt 0 2 0 4 0 6 0 8 0 1 00 1.5 1.0 0.5 0.0 2.5 3.15 2.0 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c fuses 6.3 x 32 mm (2-pole, per pole) admissible power acceptance in watt per pole 1.5 1.0 0.5 0.0 2.5 2.0 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c variants fuse drawer must be ordered separately see accessories. fingergrip and etrasafe panel mounting panel thickness s [mm] fuseholder voltage selectors internally wired order number screw - 1-pole without l 4303.0031 screw - 1-pole 3/4 digits l 4303.0091 screw - 1-pole 2 pos. l 4303.0211 screw - 1-pole without 4303.1031 screw - 1-pole 3/4 digits 4303.1091 screw - 1-pole 2 pos. 4303.1211 screw - 2-pole without l 4303.0001 screw - 2-pole 3/4 digits l 4303.0061 screw - 2-pole 2 pos. l 4303.0181 screw - 2-pole without 4303.1001 screw - 2-pole 3/4 digits 4303.1061 screw - 2-pole 2 pos. 4303.1181 snap-in 1.5 1-pole without l 4303.0032 snap-in 1.5 1-pole 3/4 digits l 4303.0092 snap-in 1.5 1-pole 2 pos. l 4303.0212 snap-in 2 1-pole without l 4303.0033 snap-in 2 1-pole 3/4 digits l 4303.0093 snap-in 2 1-pole 2 pos. l 4303.0213 snap-in 2.5 1-pole without l 4303.0034 snap-in 2.5 1-pole 3/4 digits l 4303.0094 snap-in 2.5 1-pole 2 pos. l 4303.0214 snap-in 1.5 1-pole without 4303.1032 snap-in 1.5 1-pole 3/4 digits 4303.1092 snap-in 1.5 1-pole 2 pos. 4303.1212 snap-in 2 1-pole without 4303.1033 snap-in 2 1-pole 3/4 digits 4303.1093 snap-in 2 1-pole 2 pos. 4303.1213 snap-in 2.5 1-pole without 4303.1034
power entry modules without line filter kec www.schurter.com/pg0 5 connectors panel mounting panel thickness s [mm] fuseholder voltage selectors internally wired order number snap-in 2.5 1-pole 3/4 digits 4303.1094 snap-in 2.5 1-pole 2 pos. 4303.1214 snap-in 1.5 2-pole without l 4303.0002 snap-in 1.5 2-pole 3/4 digits l 4303.0062 snap-in 1.5 2-pole 2 pos. l 4303.0182 snap-in 2 2-pole without l 4303.0003 snap-in 2 2-pole 3/4 digits l 4303.0063 snap-in 2 2-pole 2 pos. l 4303.0183 snap-in 2.5 2-pole without l 4303.0004 snap-in 2.5 2-pole 3/4 digits l 4303.0064 snap-in 2.5 2-pole 2 pos. l 4303.0184 snap-in 1.5 2-pole without 4303.1002 snap-in 1.5 2-pole 3/4 digits 4303.1062 snap-in 1.5 2-pole 2 pos. 4303.1182 snap-in 2 2-pole without 4303.1003 snap-in 2 2-pole 3/4 digits 4303.1063 snap-in 2 2-pole 2 pos. 4303.1183 snap-in 2.5 2-pole without 4303.1004 snap-in 2.5 2-pole 3/4 digits 4303.1064 snap-in 2.5 2-pole 2 pos. 4303.1184 packaging unit 50 pcs required accessor y description fusedrawer 3 fusedrawer for fuse links 5x20mm resp. 6.3x32mm fingergrip, 5 x 20, 2-pole, voltage selectors 4303.2014.00 fingergrip, 5 x 20, 2-pole, voltage selectors, 100, 120, 220, 240 4303.2014.01 fingergrip, 5 x 20, 2-pole, voltage selectors, 110, 150, 220 4303.2014.02 fingergrip, 5 x 20, 2-pole, voltage selectors, 110, 220 4303.2014.03 ... accessorie s assorted cover s rear cover 0859.0072 cord retaining kit s cord retaining strain relief flat head, a 4700.0001
5 power entry modules without line filter kec www.schurter.com/pg0 5 connectors mating outlets/connector s category / description appliance outletoverview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outletfurther types toke c connectoroverview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connectorfurther types toke c ... power cordoverview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cordfurther types toke c ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
